High Intensity UV Lamps:

Popular unit for inspection:

Click for larger picture
B-100SP High Intensity Lamp

$460.00

• The B-100 lamp is recommended for use in leak detection applications.
• Uses for the B-100AP and AP/R include science, non-destructive testing and fluorescence inspection
• The B100YP is excellent for semiconductor wafer inspection as most photoresist absorption occurs below 450nm
• 100 watt spot bulb is rated at 5000 hours. Bulb is standard in all lamps except the B-100SP
• Self-ballasted bulb included with the B-100SP has an average life of 450 to 2000 hours depending on use patterns
• Flood bulb may be used in all lamps (except B-100SP). Flood bulb life is estimated at 2000 hours
  
  Dimensions:
  B-100A: Lamp Head 8.5D x 5.5Dia. in. (216 x 140mm), Weight: 11.72lb (5.33kg)
  B-100AP: Lamp Head 9.75D x 6Dia In. (248 x 152mm), Weight: 12.5lb. (5.6kg)
  B-100AP/R: Lamp Head 9.75D x 6Dia In. (248 x 152mm), Weight: 12.5lb. (5.6kg)
  B-100SP: Lamp Head 9.75D x 6Dia. in. (248 x 152mm), Weight: 3.14lb. (1.43kg)
  B-100Y: Lamp Head 8.5D x 5.5Dia. in. (216 x 140mm), Weight: 11.72lb (5.33kg)
  B-100YP: Lamp Head 9.75D x 6Dia In. (248 x 152mm), Weight: 12.5lb. (5.67kg)
   

           Click for larger picture              
B-100AP           

B-100AP models feature a longwave UV and Cool-Touch housing, 100 watt longwave bulb and ballast base. At 18 in. (457 mm), the lamp produces a highly intense center of UV irradiance about 5 in. (127 mm) in diameter. Lamp head can rotate 360 degrees when attached to the base for hands-free operation or lamp can be removed from the base.
8 ft primary and secondary cords.

                          Click for larger picture     
           B-100YP

B-100Y and B-100YP models feature a yellow filter which blocks wavelengths shorter than 500nm and produces three strong mercury lines at 543, 574 and 576nm. B-100Y is built with the aluminum housing; B-100YP plastic housing.
 

                 Click for larger picture                
B-100A                

The longwave B-100A is manufactured with a scratch-resistant aluminum housing which connects to ballast base with an 8 foot cord; 8 foot secondary cord is included. The 100 watt longwave UV bulb is excellent for inspection applications.





     
   Click for larger picture
             B-100AR

B-100A/R - These longwave lamps feature 100 watts of power excellent for inspection applications. B-100A/R (shown)  offers  longer cord lengths - 20 foot (6.1m) primary and secondary cord lengths. B-100A/R is designed with the aluminum housing and same specification as B-100A.