Allergy Purifiers LLC offers only the highest rated, most effective HEPA Carbon Air Purifiers and Filters for Allergy Relief, MCS, Asthma Relief, VOC, VIRUS, Chemical and Odor Removal.
For use in air or water purification, treatment, laboratory oxidation studies, ozonolysis, ozonology, industrial, and commercial mold and odor remediation, and other applications.
Unlike ambient air ozone generators, these units are designed to use oxygen or air driers to greatly increase and obtain consistent high ozone outputs. Using oxygen, an air drier, the UV ozone generation method, or an oxygen concentrator results in consistent high level ozone output - unaffected by the normal variables that usually reduce outputs of all ambient air ozone generators, such as humidity. Using an air drier will more than double the output of an ambient air ozone generator. Using oxygen instead of ambient air will allow the ozone generator to produce 4 times as much ozone. Using dry air or oxygen also eliminates cleaning and maintenance. Cleaning and maintenance will be necessary for all ambient air ozone generators that do not use oxygen, or an air drier - regardless of claims.
Humidity levels above 50% will cut the output of ambient air ozone generators in half! (with the exception of UV ozone generator ozone production method) This is because ambient air ozone generators are commonly tested for their maximum output in very low humidity levels in the single digits. Some users in desert / dry areas experience humidity levels in the single digits, thus achieving the maximum ozone output of an ambient air ozone generator. More information on the variables are available on our Sizing a Generator page. Also SEECompare uv ozone generator to corona discharge ozone generators. Note: UV Ozone Generator ozone output is not affected by humidity.
The D 500 ozone generator is designed for use with oxygen or an air drier. It is available with options such as 10 position switch, air pump, and requires no cleaning. CLICK HERE for specifications.
The A 1000 ozone generator is designed for use with oxygen or an air drier. It is available with options such as 10 position switch, air pump, and requires no cleaning. CLICK HERE for specifications.
The V 8000 ozone generator is designed for use with oxygen or an air drier. It is available with options such as, 120 or 240 volt operation, 10 position switch, and requires no cleaning. This is also an excellent choice for laboratory oxidation uses. CLICK HERE for specifications.
The S 1000 series ozone generator has a built in self regenerating air drier, humidity indicator and produces 1 g/hr. It is available with options such as, 120 or 240 volt operation, 10 position switch, and requires no cleaning. CLICK HERE for specifications.
The S 2000 series ozone generator has a built in self regenerating air drier, air flow meter, humidity indicator and produces 2 g/hr. It is available with options such as a built in air pump, 120 or 240 volt operation, 10 position switch, and requires no cleaning. CLICK HERE for specifications.
The S 4000 series ozone generator has a built in self regenerating air drier, air flow meter, humidity indicator and produces 4 g/hr. It is available with options such as a built in air pump, 120 or 240 volt operation, 10 position switch, and requires no cleaning. CLICK HERE for specifications.
The V-08 air drier is designed for use with ozone generators such as the A-1000, V 8000, and other small generators. It is available with options such as, 120 or 240 volt operation.CLICK HERE for specifications.
The V-30 air drier is designed for use with multiple ozone generators such as the A-1000, V 8000, and other small generators or in higher humidity situations and larger ozone generators such as the rack mounted R series. It is available with options such as, 120 or 240 volt operation.CLICK HERE for specifications.
The V-160 air drier is designed for use with multiple large ozone generators such as the Rack mounted R series, and other small generators or in higher humidity situations. It is available with options such as, 120 or 240 volt operation.CLICK HERE for specifications.
We offer component rack systems available for custom installation for waste water treatment, pools, vans / trucks in the mold / smoke damage remediation business and all industrial applications of ozone.
Rack mounted systems are commonly used in the water purification industry for wastewater treatment, drinking water bottling, food packaging / processing decontamination, vegetable rinsing, odor control, and more.
Ozone is now approved by the FDA for use in food packaging processing plants often for meat and vegetables (and other foods) for more thorough cleansing of fruits, vegetables, other fresh produce, and fish / meats. Using ozone as a food disinfectant results in a much longer shelf life for most food items.
Ozone Production Notes: 1 ppd (pounds per day) = 18.9 g/hr = 0.45 kg/day = 0.0189 kg/hr.
Oxygen Fed Portable Cart Ozone Systems
Advantages of our industrial component rack systems include:
-Unsurpassed warranty and service with 3 full years for the rack mounted line of equipment
-Modular components allow the system to be sized to your needs - not over-sized or under-sized.
-Expandability - with our rack systems, you are not limited to a particular output. Components can be combined to achieve outputs exceeding 34,000 Grams per hour of pure ozone. (34 million mghr.).
-Component systems can be moved or transported much more easily that large 400+ pound ozone systems
-If a service or maintenance issue were to arise, with components, you are not "out of business for repair", instead, only the capacity may temporarily be reduced for a maintenance issue.
-Space saving and installation versatility is maximized with a component system. Components allow for custom installation options.
Reliability — Rack Mounted products come with a three year warranty.
Highly Competitive Pricing for a wide range of 0.1 g/h to 10,000 g/h (500 lb./day) ozone output.
Professional, Engineering quality of Design, Manufacturing and Quality Control.
Meets and exceeds ISO9000 Standards.
Certified to CSA and ETL standards for use in the U.S.A. and Commonwealth Countries, and to European Standards, also to NSF (National Sanitation Foundation) Standards.
Decades long life-span expectancy, while easy to maintain and upgrade.
Exact modular sizing (you pay only for what you need), easy installation and access.
Uninterrupted operation in case of maintenance, stand-by backup.
Ability to interface with any hardware, process, or communication system.
Highest ranking ozone/space ratio on the market, thus these tightly integrated units require minimal housing space.
High energy efficiency, thus low energy consumption.
Other products available for water purification
Rack Mounted Ultra Pure ozone generators with up to 725 g/hr that can be linked together to create 35,000 g/hr, air driers, mixing / off gas systems, foam fractionators, ozone destructors, venturi injectors, oxygen concentrators, ORP / ozone meters & controllers, back flow prevention, ozone ready ( resistant ) pumps, Teflon tubing, flow meters, and much more available. Everything you need to purify your water with ozone!!
Other higher output ozone generators.
Rack mounted ozone generators available in three configurations as well as air driers, racks, etc.
Used by leading fire smoke flood mold odor
remediation companies:
Virus, Bacteria, and MOLD Surface
Sterilization
Ozone permanently
kills odors through oxidation
The UV PRO 2800 is a top choice for heavy duty Ozone shock treatments.
Surface Sterilization up to 2,500 sq. ft.
In higher humidity, the UV PRO 2800 exceeds the ozone output of the PRO 5,000. (Read the
product description to understand why).
Ideal for use in fire / flood restoration, crime scene cleanup (protein decomposition), garbage compactors, garbage
transfer stations, heavy restoration, auto detailing, all heavy odor remediation
tasks, food service sterilization packaging / manufacturing, bacteria or mold
odors Home/ Commercial decontamination, purifying rooms in hotels and for
killing mold, and more.
Used by leading fire smoke flood mold odor
remediation companies:
The UV PRO 4000 is powerful for surface sterilization shock treatments.
Virus, Bacteria, and MOLD Surface
Sterilization
Ozone permanently
kills odors through oxidation
Surface Sterilization up to 3,500 sq. ft.
In higher humidity, the UV PRO 4000 exceeds the ozone output of the PRO 10,000. (Read the
product description to understand why).
Ideal for use in fire / flood restoration, crime scene cleanup (protein decomposition), garbage compactors, garbage
transfer stations, heavy restoration, auto detailing, all heavy odor remediation
tasks, food service sterilization packaging / manufacturing, bacteria or mold
odors Home/ Commercial decontamination, purifying rooms in hotels and for
killing mold, and more.
Used by leading fire smoke flood mold odor
remediation companies:
The UV PRO 6800 is powerful for surface sterilization shock treatments.
In moderate to higher humidity,
the UV PRO 6800exceeds the ozone output of competing units rated at
29,000mghr. (Read the product description to understand why).
Virus, Bacteria, and MOLD Surface
Sterilization
Ozone permanently
kills odors through oxidation
Surface Sterilization up to 5,500 sq. ft.
Ideal for use in fire / flood restoration, crime scene cleanup (protein decomposition), virus, MOLD remediation,
garbage compactors, garbage transfer stations, heavy restoration, auto
detailing, all heavy odor remediation tasks, food service sterilization
packaging / manufacturing, bacteria or mold odors Home/ Commercial
decontamination, purifying rooms in hotels and for killing mold, and more.
This is the new ultimate choice for Commercial
Industrial Ozone Applications / uses.
UV PRO 15000
$3,249.00
NEW Commercial Industrial Ozone Generator
Virus, Bacteria, and MOLD Surface
Sterilization
Ozone permanently
kills odors through oxidation
Used by leading fire smoke flood mold
odor remediation companies.
The UV PRO 15000 is the
ultimate heavy duty shock treatment tool for powerful surface
sterilization shock treatments.
Surface Sterilization up to 8-10,000 sq. ft.
Ideal for use in fire / flood restoration, crime scene cleanup (protein decomposition), garbage compactors,
garbage transfer stations, heavy restoration, auto detailing, all heavy
odor remediation tasks, food service sterilization packaging /
manufacturing, bacteria or mold odors Home/ Commercial decontamination,
purifying rooms in hotels and for killing mold, and more.
Ozone Generators are designed, manufactured and labeled for Industrial
Use Only. Allergy Purifiers LLC only recommends un-occupied Shock Treatment use.
All information on the o3ozone; Allergy Purifiers LLC web site is protected by international copyright law. No part of o3ozone's web site may be copied or reproduced without written consent from Allergy Purifiers LLC; o3ozone. All rights reserved, Dave Lowen, Doug Bracken & Allergy Purifiers LLC, o3ozone 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 Residential, Commercial, Industrial o3ozone ozone generators, ODOR air purifiers, AllerAir Carbon MCS Air Purifiers, Austin Air, IQAir HEPA Carbon Filter, AllerAir AirMedic Dental Source Capture, HEPA gas, ODOR Removal Allergy Asthma Filters Air Purifiers, AirSep Oxygen Generators; oxygen bars, Glass Blowing, Thermal Applications.
AllerAir HEPA Carbon Air Filter Allergy Purifies for Asthma MCS, VOC, Odors, Hospitals, clean rooms, dental offices, and anywhere the maximum degree of filtration is required. www.o3ozone.com offers a large selection of purification products.